Technics
Audio & Hifi
Maintenance & Repair
Cables
DJ Gear
Vinyl
0
Your Cart
Nagaoka JN-P110
Hover over an image to enlarge
Nagaoka JN-P110
Original replacement stylus for the Nagaoka MP-110 cartridge
ALBEPRO is NAGAOKA's official dealer in the Netherlands.
The complete "MP" program and the new "JewelTone" series from Nagaoka can be found in our program including the new DJ-44G replacement needle.
Specs
| Cartridge and Stylus | |
| Model | MP-110 |
| Type | Moving Permalloy |
| Frequency Response | 20-20.000 Hz |
| Vertical Tracking Angle | 30 ° |
| Vertical Tracking Force | 1.5 – 2.0 g |
| Recommended VTA (VTF) | 2.0 g |
| Stylus Construction | Bonded diamond, round shrank |
| Stylus Shape | Elliptical |
| Stylus Curvature Radius | 0,4 x 0,7 mil |
| Recommended Load Impedance | Min. 47K ohms (when head amplifier is connected) |
| Recommended Load Capacitance | 100 pF |
| Coil Impedance | |
| DC Resistance | |
| Coil Inductance | |
| Output Voltage | 5.0 mV (at 1 kHz, 5 cm/sec) |
| Output Channel Balance | Better than 1.5 dB (1 kHz) |
| Channel Separation | Better than 23 dB (1 kHz) |
| Cantilever | Aluminium, 0.5 mm diameter |
| Static Compliance | |
| Dynamic Compliance | 6 x 10-6 cm/dyne (100 Hz) |
| Mounting | Half-inch |
| Cartridge Weight | 6.5 g |
| Cartridge & headshell Weight | 16.5 g |
| Wire Used for Coil | High Purity Copper Wire （φ0.04 3UEW） |
| Body Material | Anti-ferro magnetic permalloy shield casing |
| ABS resin | |
| Mounting Feature | Half-inch mount |
| Terminal Pins | Brass（gold plated） |
| Dimensions | 18.0 mm H × 17.0 mm W × 28.6 mm D |
| Accessories Included (cartridge only) | non-magnetic screwdriver |
| 2 washers & 2 nuts | |
| cartridge installation screws | |
| 10 mm × 2,8 mm × 2 | |
| 13 mm x 2,8 mm x 2 | |
| plastic protector; | |
| Accessories Included (cartridge +Headshell) | plastic protector |
| Notes | Mounting Feature: |
| Note: |