Audio-Technica AT-VM95SH Cartridge

Hover over an image to enlarge

(Including tax)
In stock


VM95 series Shibata stereo cartridge

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

  • Aluminium cantilever
  • 3.5mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • 20 to 25,000Hz frequency response

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Shibata Stylus

Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.



No use of nuts

VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model Number


Cartridge EAN Code



VM Stereo Dual Magnet

Frequency Response

20 - 25,000Hz

Channel Separation

23 dB (1kHz)

Output Channel Balance

1.5 dB (1kHz)

Output Voltage

3.5mV (1kHz, 5cm/sec.)

Vertical Tracking Angle


Vertical Tracking Force Range

1.8 – 2.2g (2.0g standard)

Stylus Shape


Stylus Radius

2.7 x 0.26 mil

Stylus Construction

Nude Square Shank


Aluminium Pipe

Static Compliance

20 x 10-6 cm/dyne

Dynamic Compliance

10 x 10-6 cm/dyne (100Hz)

Wire Used For Coil

T.P. Copper

Coil Impedance


DC Resistance

485 Ω

Recommended Load Impedance


Recommended Load Capacitance

100 – 200pF

Coil Inductance

550 mH (1kHz)

Cartridge Weight



2 x M2.6 Treaded inserts

Replacement Stylus


Replacement Stylus EAN Code


Accessories Included

2x 11mm installation screws; 2x 8mm installation screws; 2x washers; non-magnetic screwdriver


17.2 (H) x 18.9 (W) x 28.3 (L) mm



Possibly you may be interested
SFK0135-01 / RMR2210-W
Technics Overhang Gauge Origineel overhang protractor van Technics voor de juiste afstand is 15mm van naaldtip t.o.v. centrale punt van de lager-as...
3,85 7,95 (Including tax) You save: 4,10
In stock
Add to wish list Compare
RMR1112-K + Screw !
Technics Headshell Stand Houder Passend op elke Technics draaitafel zoals hieronder omschreven; SL-1200MK3D SL-1210MK3D SL-1200MK5 SL-1210MK5...
3,85 (Including tax)
In stock
Add to wish list Compare
Cartridge to headshell PCOCC lead wires Perfect Crystal OCC quad wire (PCOCC high purity oxygen free conductor) 0.12mm x 22 core strand...
16,95 (Including tax)
In stock
Add to wish list Compare
Direct Drive Turntable System SL-1210MK7  Accessories Slipmat, slipsheet, dust cover, EP single adapter, counterweight,...
995,00 (Including tax)
In stock
Add to wish list Compare
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We offer only those goods, in which quality we are sure

Worldwilde shipment

Extra security & packaging during shipment