Technics
Audio & Hifi
Maintenance & Repair
Cables
DJ Gear
Vinyl
0
Your Cart
Audio-Technica AT-LP3
Save
20%
20%
Hover over an image to enlarge
AT-LP3
Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
- Fully Automatic Belt-Drive system
- Specially designed AT91R phono cartridge
- Removable universal AT-HS3 headshell
- Balanced straight tonearm
- Switchable MM & MC modes
- 33⅓ & 45 RPM selectable speeds
AT-LP3 Features
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration
Mm / Mc Cartridge Selector Switch
Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.
| Platenspeler | |
|---|---|
| Type | Volautomatisch, snaaraangddreven |
| Motor | Gelijkstroommotor |
| Snelheden | 33-1/3 en 45 toeren |
| Draaischijf | Gietaluminium |
| Wow en flutter | Minder dan 0,2% WRMS (33 1/3 toeren) bij 3kHz |
| Signaal-ruisverhouding | > 60 dB |
| Phono-voorversterker | 36dB nominaal, RIAA geëgaliseerd 56dB nominaal, RIAA geëgaliseerd |
| Uitgangsniveau | “PHONO” (MM) 3,5mV nominaal bij1kHz, 5cm/sec “LINE” (MC) 220mV nominaal bij 1kHz, 5cm/sec |
| Voedingsvereisten | 220 tot 240 V / 50, 60 Hz |
| Stroomverbruik | 2W |
| Afmetingen | 435 mm × 353 mm × 128 mm (B×D×H) |
| Gewicht | 5,2 kg |
| Meegeleverde accessoires |
Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
| Elementen en naalden | |
|---|---|
| Model | AT91R |
| Type | VM Dual Magnet |
| Uitgangsspanning | 3,5mV (mV bij 1kHz, 5 cm/sec) |
| Bereik verticale trackingskracht | 1,5 tot 2,5 gr (2,0 gr standaard) |
| Naaldconstructie | 0,6-mil conisch, gelijmd |
| Cantilever | Aluminium buis |
| Aanbevolen ladingsimpedantie | 47.000 ohm |
| Weight | 5,0 gr |
| Headshell | |
|---|---|
| Model | AT-HS3 |
| Gewicht | 11,1 gr |
| Overhangaanpassing | 8 mm |
| Toonarm | |
|---|---|
| Type | Statisch gebalanceerde rechte toonarm met zachte dempingcontrol |
| Effectieve lengte | 221,5 mm |
| Overhang | 19 mm |
| Maximale trackingfouthoek | Minder dan 3° |
| Aanpassingsbereik naalddruk | 1 tot 4 gr |
| Toegestaan elementgewicht | 14,5 tot 20 gr |
| Anti-skating bereik | 0 - 3 gr |
Specs